![background image](http://html.mh-extra.com/html/north-american-tool-industries/7525/7525_important-operating-instructions_1707604001.webp)
8807525 06/13
20 TON HYDRAULIC JACK
CALIFORNIA PROPOSITION 65
WARNING: You can create dust
when you cut, sand, drill or grind
materials such as wood, paint,
metal, concrete, cement, or other
masonry. This dust often
contains chemicals known to
cause cancer, birth defects, or
other reproductive harm. Wear
protective gear.
WARNING: This product or its
power cord may contain
chemicals, including lead,
known to the State of California
to cause cancer and birth
defects or other reproductive
harm. Wash hands after
handling.
Important!
When using equipment, a few
safety precautions must be
observed to avoid injuries and
damage. Please read the complete
operating manual with due care.
Keep this manual in a safe place,
so that the information is available
at all times. If you give the
equipment to any other person,
give them these operating
instructions as well. We accept no
liability for damage or
accidents which arise due to
non-observance of these
instructions and the safety
information herein.
SPECIFICATIONS:
Lift Capacity:
20 Tons
Min. Lift Height:
9-1/2 in
Max. Lift Height:
17-7/8 in
Ram Travel:
6 in
Screw Top Adjustment:
2-3/8 in
CAUTION:
FOR YOUR OWN SAFETY
READ INSTRUCTION
MANUAL COMPLETELY AND
CAREFULLY BEFORE
OPERATING. Failure to follow
all instructions as listed
below may result in electrical
shock, fire, and/or serious
personal injury.
SAFETY WARNINGS
1) Read, understand and
follow the warnings listed in
this manual.
2) Wear eye protection while
operating this jack.
3) Inspect the jack before
each use. Do not use this
jack if it is damaged or altered
in any way or if it is in poor
condition.
4) Set up and use the jack on
a hard, level surface to
prevent tipping.
5) The load must not exceed
the rated lifting capacity of the
jack. Lift only dead weight.
6) Center the load on the jack
saddle. Off center loads can
cause damage to the seals
and can cause hydraulic
failure.
7) Use the jack for lifting
purposes only. This jack is
designed to lift loads and not
support them. Support a lifted
load with jack stands.
8) Use only approved
hydraulic fluids.
Model: 7525