Trolex TX6356 User Manual Download Page 51

Page: 51 / 56

TX6356 User Manual

TX6356-UM-EN-

6.2.5 Sentro Humidity Sensor

- Function Test

1. Under normal circumstances, the

calibration of the humidity sensor will not

change significantly.

2. Check the accuracy by comparing the

display reading with a reference value of

humidity.

OR
2. Alternatively, the

Sentro Humidity

Sensor

can be removed and returned

to your local Trolex service agent, for

checking and calibration across the full

operating spectrum. Contact

service@

trolex.com

for further information.

3. After the completion of all maintenance,

update the maintenance records.

6.3 Disposal

Part of the ethos of Trolex is sustainable

design. The

Sentro Humidity Sensor

contains materials that can be recovered,

recycled and reused. At the end of its

useful life ensure that the

Sentro Humidity

Sensor

is recycled in accordance with local

laws and bylaws for the geographic area

where it is located. The end of its useful

life is to be determined by the owner/

operator of the equipment and not Trolex.

Ensure that the

Sentro Humidity Sensor

is recycled by licenced waste contractors

with the appropriate licences for handling

metal, plastic and electronic waste in the

geographic area where the

Sentro Humidity

Sensor

is located.

www.trolex.com

Summary of Contents for TX6356

























































Search results

Summary of Contents for TX6356

Reviews:

Related manuals for TX6356

Brands by name

Popular brands

Trolex TX6356, User Manual

Search results

Summary of Contents for TX6356

Reviews:

Related manuals for TX6356

Brands by name

Popular brands