9
ASSEMBLY STEPS
1. PREPARATION
•
Before assembling make sure that you will have enough space around the item.
•
Use the supplied parts and hardware for the assembly.
•
Before assembling please check whether all the required parts have been supplied as per the exploded
drawing on the opposite page.
STEP 1:
FRONT AND BACK STABILISERS ASSEMBLY
Attach the Front Stand Tube (Ø60 x 500 mm) (2) and the Rear Stand Tube (Ø60 x 500 mm) (3) onto the Main
Frame (1).
Tighten the 2 Domed Nuts (M8) (6), 2 Bolts (M8 x 70 mm) (4) and 2 Washers (Ø8 x Ø20 x T1.5)
(5) using the
spanner supplied on both the Front Stand Tube (Ø60 x 500 mm) (2) and Back Stand Tube (Ø60 x 500 mm) (3).
STEP 1
Summary of Contents for RESPONSE CYCLE 100
Page 8: ...8 EXPLODEDDRAWING...
