Trojan RESPONSE CYCLE 100, User Manual, Page: 10 / 22

10
ASSEMBLY STEPS
STEP 2: SADDLE ASSEMBLY
Remove the 3 Nuts (M8) (11) and the 3 Washers (Ø8 x 17 x 1.2) (7) from the Seat (8).
Place the Seat (8) on the Seat Post (Ø38) (9) and secure using the 3 Nuts (M8) (11) and 3 Washers (Ø8 x 17 x 1.2) (7).
Put the Sleeve Bellow (23) onto the Seat Post (Ø38) (9). Loosen the Adjustment Knob (18).
Slide the Seat Post (Ø38) (9) into the Main Body (1). Line up the holes on the Seat Post (Ø38) (9) and the Main
Frame (1).
Tighten the Adjustment Knob (18) to secure.
STEP 2