Trojan CADENCE 420, User Manual

Page: 12 / 25

12
ASSEMBLY STEPS
STEP 3: HANDLEBAR ASSEMBLY
Attach the Handlebar (14) to the Front Post (13), securing
with 1 Clamp (36), 1 Allen Bolt (M8 x 20 mm) (16), 1 Cover
for Clamp (37) and the T Type Knob (38). Insert the Hand
Pulse Wire (28) through the Grommet (29) and insert it
through the hole in the Front Post (13). Pull the Hand
Pulse Wire (28) through the hole at the top of the Front
Post (13) and insert the Grommet (29) into the upright.
Connect the Hand Pulse Wire (28) to the Upper Hand Pulse
Wire (34). Connect the Middle Console Wire (25) to the
Upper Console Wire (35).
Attach the Console (15) onto the bracket of the Front
Post (13), securing it using 4 Screws (M5 x 10 mm) (20)
which are pre-assembled on the back of the Console (15).
STEP 4: SEAT ASSEMBLY
Attach the Seat (12) to the Seat Post (11), securing
it using 3 Flat Washers (17 x 8 mm) (30), 3 Spring
Washers (M8) (31) and 3 Nylon Locknuts (M8) (32),
which are pre-assembled on the seat. Take the Quick
Release Knob (33) off Main Frame (1) then insert
the Seat Post Assembly (11) into the Main Frame (1)
and secure into the desired position using the Quick
Release Knob (33).
STEP 3
STEP 4