5
5. Failure to avoid excessive stops and starts. Not
more than three (3) on/off cycles per 24 hours
of operation.
6. Operation of visibly damaged equipment.
7. Failure to avoid undue overhead piping stress
which may result in structural damage to the
UV unit.
8. Use of components other than those provided or
authorized by Aquafine.
9. Failure to correct overhead piping connection leaks
or compression nut seal leaks which result in
damage to the electrical components.
10. Operating the unit without water flow.
To maintain your UV units warranty, please fill out and
mail the Warranty Registration Card in the back
pocket of this manual and return to Aquafine Customer
Service.
The following installation and operating conditions
are considered hazardous or damaging to the
equipment and can compromise the ability of the
Aquafine unit to perform as intended.
ANY OF THE FOLLOWING CONDITIONS
MAY VOID THE EQUIPMENT WARRANTY.
1. Failure to connect proper electrical service to unit.
2. Failure to properly ground the unit.
3. Failure to eliminate excessive vibration, piping
movement, or water hammer.
4. Failure to exercise caution in the handling of the
sensitive and delicate components (such as
lamps, quartz sleeves, electronic boards, etc.)
during installation and/or maintenance proce-
dures.
Summary of Contents for Aquafine DW Series
Page 2: ......
