Trocen TL-3120 User Manual Download Page 34

Page: 34 / 94

TL-3120 Motion Control User Manual

WWW.SZTROCEN.COM

Max Power%

Min Power%

Displays the Max & Min power. Max power means working

power. Min power means turning power. During cutting process,

if the cutting lines is uneven (different cutting depth), the

maximum and minimum power should be adjusted to ensure

the best cutting effect. If the maximum and minimum power is

set too high, the cutting material may be damaged. If set too low,

may cause incomplete cutting. Users shall set appropriate

maximum and minimum power values according to different

cutting materials.

Time

Displays the amount of time worked with this task.

Status

Displays the machine state. Includes working state, idle state,

pause state. There will be a percentage to show the working

process of the current file under working state.

X/Y/Z

Displays the X/Y/Z coordinate in the working state.

Summary of Contents for TL-3120






























































































Search results

Summary of Contents for TL-3120

Reviews:

Brands by name

Popular brands

Trocen TL-3120, User Manual

Search results

Summary of Contents for TL-3120

Reviews:

Brands by name

Popular brands