Triumph Tiger 900 GT, Owner'S Handbook Manual

Page: 89 / 204

General Information
89
There are two levels of heat: low and
high.
1 2
1. Low heat symbol (amber)
2. High heat symbol (red)
N
0 0
2 2
4 4
6 6
8 8
10 10
12 12
0
F E C H
21.5 10:55
AM
C
o
x1000rpm
ABS
MPH
1 2
1. Rider’s heated seat (low heat selected)
2. Passenger’s heated seat (high heat
selected)
Rider Heated Seat
• For maximum benefit in cold
conditions, from the OFF position
press the rider heated seat switch
once for the high heat setting
initially, and then reduce the heat
level by pressing the rider heated
seat switch again for the low heat
setting when the seat has warmed
up.
• To turn the rider heated seat off,
press and release the rider heated
seat switch until the heated seats
symbol is no longer shown in the
display.
Passenger Heated Seat
• For maximum benefit in cold
conditions, switch the passenger
heated seat switch to the high
heat setting initially and then
reduce the heat level by switching
the passenger heated seat switch
to the low heat setting when the
passenger seat has warmed up.
• To turn the passenger heated seat
off, move the switch to its central
position. After a short delay, the
passenger heated seat symbol will
no longer be shown in the display.
Low Power Voltage Cut Off
If a low voltage is detected the heated
seats switches will power off. The
heated seats will not function again
until the voltage rises to a safe level.
The switches will not power back on
automatically even if the voltage rises
to the safe level. The ignition must be
switched off then on again to activate
the heated seats.