Triumph Tiger 900 GT Owner'S Handbook Manual Download Page 147

Page: 147 / 204

Maintenance

147

Front Suspension Rebound Damping

Adjustment

Tiger 900 Rally and Tiger 900 Rally Pro

The rebound damping adjuster is

located at the top of the left hand fork.

1. Rebound damping adjuster
2. Fork top cap

To change the front rebound damping

setting:
• Rotate the rebound damping

adjuster clockwise to increase, or

anticlockwise to decrease.

• Always count the number of clicks

back from the fully clockwise

(closed) position.

Front Suspension Rebound Damping

Adjustment

Tiger 900 GT, Tiger 900 GT (LRH) and

Tiger 900 GT Pro

The rebound damping adjuster is

located at the top of the right hand fork.

1. Rebound damping adjuster
2. Fork top cap

To change the front rebound damping

setting:
• Rotate the rebound damping

adjuster clockwise to increase, or

anticlockwise to decrease.

• Always count the number of clicks

back from the fully clockwise

(closed) position.

Summary of Contents for Tiger 900 GT













































































































































































































Search results

Summary of Contents for Tiger 900 GT

Reviews:

Related manuals for Tiger 900 GT

Brands by name

Popular brands

Triumph Tiger 900 GT, Owner'S Handbook Manual

Search results

Summary of Contents for Tiger 900 GT

Reviews:

Related manuals for Tiger 900 GT

Brands by name

Popular brands