Triumph Tiger 900 GT, Owner'S Handbook Manual

Page: 125 / 204

Maintenance
125
All Models except Tiger 900 Rally Pro
3
2
1
1. Sump guard
2. Left hand side fixings
3. Bottom fixings
To remove the sump guard:
• Remove the two left hand side
fixings.
• Remove the two bottom fixings and
remove the sump guard.
To refit the sump guard:
• Align the sump guard to the
motorcycle and secure with the two
bottom fixings. Do not fully tighten
at this stage.
• Refit the two left hand side fixings
and tighten to 6 Nm.
• Tighten the bottom fixings to 6 Nm.
Engine Oil Level Inspection
Warning
Never start the engine or run the
engine in a confined area.
Exhaust fumes are poisonous and can
cause loss of consciousness and death
within a short period of time.
Always operate the motorcycle in the
open air or in an area with adequate
ventilation.
Warning
If the engine has recently been
running, the exhaust system will be
hot.
Before working on or near the exhaust
system, allow sufficient time for the
exhaust system to cool as touching
any part of a hot exhaust system
could cause burn injuries.