Triumph Tiger 900 GT Owner'S Handbook Manual Download Page 110

Page: 110 / 204

How to Ride the Motorcycle

110

Luggage

Make sure that any luggage containers

are closed, locked and securely fitted to

the motorcycle.

Miscellaneous

Visually check that all fixings are tight.

Steering

Check that the handlebar turns

smoothly without excessive free play or

tight spots. Make sure that the control

cables do not restrict the steering in

any way.

Tyres

High speed operation is hard on tyres,

and tyres that are in good condition are

crucial to riding safely. Examine their

overall condition, inflate to the correct

pressure (when the tyres are cold),

and check the wheel balance. Securely

fit the valve caps after checking tyre

pressures. Observe the information

given in the maintenance and

specification sections on tyre checking

and tyre safety.

Summary of Contents for Tiger 900 GT













































































































































































































Search results

Summary of Contents for Tiger 900 GT

Reviews:

Related manuals for Tiger 900 GT

Brands by name

Popular brands

Triumph Tiger 900 GT, Owner'S Handbook Manual

Search results

Summary of Contents for Tiger 900 GT

Reviews:

Related manuals for Tiger 900 GT

Brands by name

Popular brands