Triumph Tiger 900 GT Owner'S Handbook Manual Download Page 15

Page: 15 / 204

Warning Labels

Warning Label Locations (continued)

Caution

All warning labels and decals, with the exception of the Running-in label, are fitted

to the motorcycle using a strong adhesive. In some cases, labels are installed prior

to an application of paint lacquer. Therefore, any attempt to remove the warning

labels will cause damage to the paintwork or bodywork.

DAILY SAFETY CHECKS

TÄGLICHE SICHERHEITSKONTROLLEN

CONTROLES DE SECURITE QUOTIDIENS

CHEQUEOS DE SEGURIDAD DIARIOS

VERIFICAÇÕES DIÁRIAS DE SEGURANÇA

VERIFICHE GIORNALIERE DI SICUREZZA

DAGELIJSKE VEILIGHEIDSINSPECTIES

DAGLIG SÄKERHETSKONTROLL

運行前点検

1.  Daily Safety Checks (page 96)
2.  Unleaded Fuel (page 80)
3.  Helmet (page 9)

4. Coolant (page 129)
5. Tyre Pressure Monitoring System (if

fitted) (page 155)

6. Engine Oil (page 124)

Summary of Contents for Tiger 900 GT













































































































































































































Search results

Summary of Contents for Tiger 900 GT

Reviews:

Related manuals for Tiger 900 GT

Brands by name

Popular brands

Triumph Tiger 900 GT, Owner'S Handbook Manual

Search results

Summary of Contents for Tiger 900 GT

Reviews:

Related manuals for Tiger 900 GT

Brands by name

Popular brands