Triumph STREET TRIPLE, Owner'S Handbook Manual

Page: 26 / 134

26
General Information
Models without TPMS: Press button 'B'
and do not touch buttons 'A' or 'B' again until
UnitS is visible in the display screen. When
UnitS is visible in the display screen, press
and release button 'A' until rEturn is visible
then press button 'B'. Trip 1 will be visible in
the display screen.
Models with TPMS: Press button 'B' and do
not touch buttons 'A' or 'B' until PSI or bAr is
displayed. Press and release button 'A' until
the desired tyre pressure units are visible.
Press button 'B' and wait until UnitS is
displayed, then press button 'A' and when
rEturn is displayed press button 'B'. Trip 1 will
be visible in the display screen.
ABS Disable
It is possible to temporarily disable the ABS
system. The ABS system cannot be
permanently disabled, it will be automatically
enabled when the ignition is turned off and
then on again.
To Disable the ABS
To access the ABS Disable function, turn the
ignition to the ON position.
Press and release button 'A' until set up is
visible in the display screen then press
button 'B'.
Press and release button 'A' until ABS is
visible.
Pressing button 'B' will disable the ABS
system; the message ABS OFF will be
displayed for 2 seconds, and the ABS
warning light will be illuminated.
To Enable the ABS
To enable the ABS system again, turn the
ignition off and on.
Warning
If the ABS is disabled, the brake system will
function as a non-ABS braking system. In
this situation braking too hard will cause
the wheels to lock, and may result in loss of
motorcycle control and an accident.