Triumph STREET TRIPLE, Owner'S Handbook Manual

Page: 28 / 134

28
General Information
Setting Gear Change Light Limits
The gear change lights will not operate below
3,500 rpm to avoid the lights operating at
idle.
To change the gear change light modes, with
the motorcycle stationary and in neutral turn
the ignition to the ON position.
Press and release button 'A' until set up is
visible in the display screen then press
button 'B'.
Press and release button 'A' until SHIFt is
visible then press button 'B'. The current
mode will be displayed and the
corresponding gear change lights will
illuminate.
Press and release button 'A' until the desired
gear change light mode is visible then press
button 'B'. The display will scroll through in
the following order:
• SE (Scale mode);
• 3 (3 LED mode);
• 6 (6 LED mode);
• OFF (Gear change lights off).
Note:
• The motorcycle is delivered from
the factory with the gear change
light set to the 6 LED mode at
3,500 rpm.
1. Gear change lights
2. Display screen (3 mode shown)
3. Button A
4. Button B
3
4
cfit
2
1