Triumph STREET TRIPLE, Owner'S Handbook Manual

Page: 21 / 134

21
General Information
Speedometer and Odometer
The digital speedometer indicates the road
speed of the motorcycle. The read-out
displays the motorcycle road speed in
increments of one kilometre (or mile) per
hour.
The electronic odometer and two trip meters
are in the display screen. For details of the
operation of the odometer and trip meters,
please refer to the following pages.
Tachometer
The tachometer shows the engine speed in
revolutions per minute - rpm (r/min). At the
end of the tachometer range there is the
'red zone'. Engine rpm (r/min) in the red
zone is above maximum recommended
engine speed and is also above the range for
best performance.
Trip Computer
1. Display screen
2. Button A
To access the trip computer information press
and release button 'A' until the desired
display is visible. The display will scroll
through in the following order:
• Trip Meter 1
• Trip Meter 2
• Lap Timer
• Tyre Pressure Monitoring System -
if fitted
• Set up.
Note:
• The lap timer (lap) will only be
displayed if it is turned on in set up
(see page
31 ).
• The tyre pressure monitoring
system (TPMS) is an accessory which
must be fitted by your authorised
Triumph dealer. The TPMS display
will then be activated by your
authorised Triumph dealer.
• Set up is only accessible when the
motorcycle is stationary and in
neutral.
Caution
Never allow engine rpm to enter the
'red zone' as severe engine damage may
result.
2
1