Triumph Sprint ST ABS, Handbook

Page: 89 / 116

89
Maintenance and Adjustment
Spring Pre-Load Adjustment
1. Spring pre-load adjuster
The spring pre-load adjuster is situated on
the left hand side of the motorcycle, at the
top of the rear suspension unit.
To adjust the spring pre-load setting rotate
the slotted adjuster clockwise to increase, or
anti-clockwise to decrease.
Note:
• The settings are all measured by
the number of adjuster 'clicks' out
from the fully screwed in position.
• The motorcycle is delivered from
the factory with the spring
pre-load set to 25 'clicks' out from
the fully screwed in position.
Tyres
Typical Tyre Marking
This motorcycle is equipped with tubeless
tyres, valves and wheel rims. Use only tyres
marked 'TUBELESS' and tubeless valves on
rims marked 'SUITABLE FOR TUBELESS
TYRES'.
ccnt
1
ccom