background image

64

Maintenance and Adjustment

Scheduled Maintenance

To maintain the motorcycle in a safe and
reliable condition, the maintenance and
adjustments outlined in this section must be
carried out as specified in the schedule of
daily checks, and also in line with the
scheduled maintenance chart. The
information that follows describes the
procedures to follow when carrying out the
daily checks and some simple maintenance
and adjustment items.

Triumph Motorcycles cannot accept any
responsibility for damage or injury resulting
from incorrect maintenance or improper
adjustment carried out by the owner.

Warning

Special tools, knowledge and training are
required in order to correctly carry out the
maintenance items listed in the scheduled
maintenance chart. Only an authorised
Triumph dealer will have this knowledge
and equipment.

Since incorrect or neglected maintenance
can lead to a dangerous riding condition,
always have an authorised Triumph dealer
carry out the scheduled maintenance of
this motorcycle.

Warning

All maintenance is vitally important and
must not be neglected. Incorrect
maintenance or adjustment may cause one
or more parts of the motorcycle to
malfunction. A malfunctioning motorcycle
may lead to loss of control and an accident.

Weather, terrain and geographical location
affects maintenance. The maintenance
schedule should be adjusted to match the
particular environment in which the vehicle
is used and the demands of the individual
owner.

Since incorrect or neglected maintenance
can lead to a dangerous riding condition,
always have an authorised Triumph dealer
carry out the scheduled maintenance of
this motorcycle.

Summary of Contents for Sprint ST ABS





















































































































Reviews: