Triumph Sprint ST ABS, Handbook

Page: 87 / 116

87
Maintenance and Adjustment
Suspension Setting Chart
Note:
• This chart is only a guide. Setting
requirements may vary for rider
weight and personal preferences.
See the following pages of how to
adjust your suspension.
Front Suspension Settings
The standard suspension settings provide a
comfortable ride and good handling
characteristics for general, solo riding. The
chart shows suggested settings for the front
and rear suspension.
The front suspension is adjustable for
pre-load only. The spring pre-load adjusters
are located at the top of each fork.
Note:
• The setting figures above/over are
all measured as adjuster turns
from the fully screwed in position.
LOADING FRONT REAR
Spring
Pre-Load +
Rebound
Damping*
Spring
Pre-Load **
Solo
Riding Standard 10 1.50 25.00
Softer 11 2.00 29.00
Firmer 9 1.00 21.00
Rider and
Passenger or Rider
and Luggage 8-9 0.50 15.00
Rider, Passenger
and Luggage 7-8 0.50 05.00
+ mms above fork cap.
* Number of adjuster turns out from the fully screwed in
position.
** Number of clicks out from the fully screwed in position.
Warning
Ensure that the correct balance between
front and rear suspension is maintained.
Suspension imbalance could significantly
change handling characteristics leading to
loss of control and an accident. Refer to the
chart on the previous page for further
information or consult your dealer.
Warning
Ensure that the adjusters are set to the
same setting on both forks. Settings which
vary from left to right could significantly
change handling characteristics leading to
loss of control and an accident.