Triumph Adler Utax PF 770, Service Manual

Page: 45 / 80

3NG
1-3-20
U034 [LSU Out Top B/W] [LSU Out Top 3/4]
Large size: 218 mm or more in width of paper.
5. Change the setting value using the /- or numeric keys.
For output example 1, increase the value. For output example 2, decrease the value.
Figure 1-3-4
6. Press the start key. The value is set.
Remark
When changing the setting value of [Large] each item is modified, equal to amount of the value
which is changed adds also the value of [Small] each item and is pulled.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following
adjustments in maintenance mode.
Item No. Description
Display Description
Setting
range
Initial
setting
Change in
value per step
MPT(L) Paper feed from MP tray
(when large size paper is used) -3.0 to 3.0 0 0.1 mm
Cassette(L) Paper feed from cassette
(when large size paper is used) -3.0 to 3.0 0 0.1 mm
Duplex(L) Duplex mode (second)
(when large size paper is used) -3.0 to 3.0 0 0.1 mm
MPT(S) Paper feed from MP tray
(when small size paper is used) -3.0 to 3.0 0 0.1 mm
Cassette(S) Paper feed from cassette
(when small size paper is used) -3.0 to 3.0 0 0.1 mm
Duplex(S) Duplex mode (second)
(when small size paper is used) -3.0 to 3.0 0 0.1 mm
Correct image Output
example 1
Output
example 2
Leading edge
registration
(20 ± 1.0 mm)
U034
U066 U071