Triumph Adler Utax PF 770, Service Manual

Page: 46 / 80

3NG
1-3-21
U034 Adjustment: Center line adjustment
1. Press the system menu key.
2. Press the start key to output a test pattern.
3. Press the system menu key.
4. Select the item to be adjusted.
5. Change the setting value using the +/- keys or numeric keys.
For output example 1, increase the value. For output example 2, decrease the value.
Figure 1-3-5
6. Press the start key. The value is set.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following
adjustments in maintenance mode.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
Setting
range
Initial
setting
Change in
value per step
MPT Paper feed from MP tray -3.0 to 3.0 0 0.1 mm
Cassette1 Paper feed from cassette 1 -3.0 to 3.0 0 0.1 mm
Cassette2 Paper feed from cassette 2 -3.0 to 3.0 0 0.1 mm
Cassette3 Paper feed from optional cassette 3 -3.0 to 3.0 0 0.1 mm
Cassette4 Paper feed from optional cassette 4 -3.0 to 3.0 0 0.1 mm
Cassette5 Paper feed from optional cassette 5 -3.0 to 3.0 0 0.1 mm
Cassette6 Paper feed from optional cassette 6 -3.0 to 3.0 0 0.1 mm
Cassette7 Paper feed from optional cassette 7 -3.0 to 3.0 0 0.1 mm
Duplex Duplex mode (second) -3.0 to 3.0 0 0.1 mm
Center line of printing
(within ± 2.0 mm)
Correct image Output
example 1
Output
example 2
U034
U067 U072