Triumph Adler DC 2028 Instruction Handbook Manual Download Page 266

Page: 266 / 435

Default Setting (System Menu)

OPERATION GUIDE

8-81

Printing Reports/Sending Notice

Print reports to check the machine settings and status. Default settings for printing the result reports can also
be configured.

NOTE:

If user login administration is enabled, you can only print by logging in with administrator privileges.

Printing Reports

Printable reports are as follows.

Menu map

Outputs a menu map of this machine.

Status Page

Check the information including current settings, available memory space, and optional equipment installed.

Firmware Version

Menu Map

Status Page

Firmware Version

Summary of Contents for DC 2028




















































































































































































































































































































































































































































Search results

Summary of Contents for DC 2028

Reviews:

Brands by name

Popular brands

Triumph Adler DC 2028, Instruction Handbook Manual

Search results

Summary of Contents for DC 2028

Reviews:

Brands by name

Popular brands