Triumph Adler DC 2028, Instruction Handbook Manual

Page: 146 / 435

Sending Functions
OPERATION GUIDE 5-13
5
Adjusting Density
Use the procedure below to adjust the density when scanning the originals.
The table below shows the available settings.
The procedure for adjusting the density is explained below.
1
Press the Send key.
2
Place the originals on the platen.
3
Press the Function Menu key. Function Menu
appears.
4
Press the
U
or
V
key to select [Density].
5
Press the OK key. Density appears.
6
Press the
U
or
V
key to select [Auto] or [Manual].
If you select [Manual], press the OK key, and then
select the density on the next screen.
7
Press the OK key.
Completed. is displayed and the screen returns to
the basic screen for sending.
8
Specify the destination, and press the Start key to
start sending.
Item Detail
Manual Adjust density using 7 levels.
Auto Optimum density is selected according to the
density of the original.
Function Menu: a b
*********************
2
Original Size
T
3
Original Image
T
[ Exit ]
Density: a b
*********************
2
Manual