- - XM572-V1.0-NR
１１
-
Restore factory settings
With this function you can restore the factory settings of the device. All settings will be set back to the default
values (shaded). Any edited scenes will be lost.
Select “LODA” by pressing [UP] or [DOWN] button.
Press [ENTER], the display shows “ON” or “OFF”.
Press [UP] to select “ON” if you wish to enable this function or press [DOWN] button to “OFF” if you don’t.
Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.
——“
HIBE
”
Stand by mode
The lamp and step motors will be power off if the fixture stay without DMX signal for 15 mins (Factory
default).And the fixture will be reset before working once it receive DMX signal again.
1. Select
“HIBE”
by pressing
[UP]
or
[DOWN]
button.
2. Press
[ENTER]
, the display shows
“15M”
.
3. Press
[UP]
or
[DOWN]
button
, the display shows
“
01M
”，“
02M
”
….
“
99M
”
or
“
OFF
”
.
4. Press
[ENTER]
to confirm or Press
[MODE/ESC]
to return to the main menu.
-
Software version
With this function you can display the software version of the device.
Select “VER” by pressing [UP] or [DOWN] button.
Press [ENTER], the display shows “V-X.X”, “X.X” stands for the version number, e.g. “V-1.0”, “V-2.6”.
Press [MODE/ESC] to return to the main menu.
-
Main menu 2
Press [MODE/ESC] to enter the main menu (display flashing).
Press [UP] or [DOWN] button to select “ADJU”.
-
Lamp adjustment
With this function you can adjust the lamp via the Control Board. The shutter opens and the lamp can be
adjusted. In this mode, the device will not react to any control signal.
Select “LADJ” by pressing [UP] or [DOWN] button.
Press [ENTER], the display shows “ON” or “OFF”.
Press [UP] to select “ON” if you wish to enable this function or press [DOWN] button to “OFF” if you don’t.
Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.
-
Test function of each channel
With this function you can test channel on its (correct) function.
Select “TEST” by pressing [UP] button.
Press [ENTER], the display shows “T-XX”, “X” stands for the channel number.
The current channel will be tested.
Select the desired channel by pressing [UP] or [DOWN] button.
