- - XM572-V1.0-NR
１０
2. Press the
[UP]
button to select
“ON”
to activate this function, or
“OFF”
to deactivate this function. Press
[ENTER]
to confirm.
3. Press
[Mode/Esc]
to return to the main menu.
-
Main menu 1
Press [MODE/ESC] to enter the main menu (display flashing).
Press [UP] or [DOWN] button. To select “SET”.
-
Pan Reverse
With this function you can reverse the Pan-movement.
Select “RPAN” by pressing [UP] or [DOWN] button.
Press [ENTER], the display shows “ON” or “OFF”.
Press [UP] to select “ON” if you wish to enable this function or press [DOWN] button to “OFF” if you don’t.
Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.
-
Tilt Reverse
With this function you can reverse the Tilt-movement.
Select “RTIL” by pressing [UP] or [DOWN] button.
Press [ENTER], the display shows “ON” or “OFF”.
Press [UP] to select “ON” if you wish to enable this function or press [DOWN] button to “OFF” if you don’t.
4. Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.
-
Mic sensitivity
With this function you can adjust the sensitivity of the microphone.
1. Select “MIC” by pressing [UP] or [DOWN] button.
Press [ENTER], the display shows “M-XX”, “XX” stands for the number from 0 to 99.
3.
．
Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.
-
Automatic Run by no DMX
With this function you can automatic run the device by no DMX.
1. Select “AUTO” by pressing
[UP]
or
[DOWN]
button.
2. Press
[ENTER]
, the display shows “CLOS”, “HOLD”, “AUTO” or “AUDI”.
3. Press
[UP]
or
[DOWN]
button to select “CLOS”, “HOLD”, “AUTO” or “AUDI”, the default is “HOLD”.
4. Press
[ENTER
] to confirm or Press
[MODE/ESC]
to return to the main menu.
-
Fan’s mode select
With this function you can select the Fan’s mode.
1. Select “FANS” by pressing
[UP]
or
[DOWN]
button.
2. Press
[ENTER]
, the display shows “HIGH” or “AUTO”.
3. Select “HIGH” or “AUTO” by pressing
[UP]
or
[DOWN]
button.
4. Press
[ENTER]
to confirm or Press
[MODE/ESC]
to return to the main menu.
-
Reset
With this function you can reset the device via the Control Board.
Select “REST” by pressing [UP] or [DOWN] button.
Press [ENTER], the display shows “ON” or “OFF”.
Press [UP] to select “ON” if you wish to enable this function or “OFF” if you don’t.
Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.
