- - XM464-V1.2-NR
１０
Set the DMX-value of channel 3 to the desired starting address. If you want to set the starting address to 57, set
channel 1 to "7", channel 2 to "7" and channel 3 to "57". If you want to set the starting address to 420, set
channel 1 to "7", channel 2 to "8" and channel 3 to "164" (256+164=420).
Wait for approx. 20 seconds and the unit will carry out a reset. After that, the new starting address is set.
- Program Run, Master setting
With the function
"RUN"
, you can run the internal program. You can set the number of steps under Step. You
can edit the individual scenes under Edit. You can run the individual scenes either automatically (AUTO), i.e.
with the adjusted Step-Time or sound-controlled (SOUN). The selection "ALON" means Stand Alone-mode
and "MAST" that the device is defined as master.
1. Select
"AUTO"
or
"SOUN"
by pressing
[UP]
or
[DOWN]
button.
2.
Press
[ENTER]
for selecting the desired extension menu.
3.
Select
"ALON"
or
"MAST"
by pressing
[UP]
or
[DOWN]
button.
4.
Press
[ENTER]
to confirm or Press
[MODE/ESC]
to return to the main menu.
- Display the DMX-value, Reverse display, Shut off LED display
- Display the DMX 512 value of each channel
With this function you can display the DMX 512 value of each channel.
1. Select
"VALU"
by pressing
[UP]
or
[DOWN]
button.
2.
Press
[ENTER]
to confirm; the display shows
“D-00”
. In this setting, the DMX-adjustment of every
channel
will be displayed.
3.
Press
[UP]
or
[DOWN]
button in order to select the desired channel. If you select
“D-14”
the display will
only
show the DMX-value of the 14
th
channel.
4. Press
[ENTER]
to confirm or Press
[MODE/ESC]
to return to the main menu.
5. The display shows
"D- XX“
, ”X” stands for the DMX-value of the selected channel.
- Reverse display
With this function you can rotate the display by 180
°
.
1.
Select
"RDIS"
by pressing
[UP]
or
[DOWN]
button.
2.
Press
[ENTER]
, the display shows
“ON”
or
“OFF”
.
3.
Press
[UP]
to select
“ON”
if you wish to enable this function or press
[DOWN]
button to
“OFF”
if you
don’t; the display will rotate by 180
°
.
4. Press
[ENTER]
to confirm or Press
[MODE/ESC]
to return to the main menu.
