- - XM464-V1.2-NR
９
Main Menu Functions
Main functions:
- Main menu 0
1. Press
[MODE/ESC]
to enter the main menu
"MODE"
(display flashing)
2. Press
[ENTER]
and select
"ADDR"
,
“RUN”
or
"DISP"
by pressing
[UP]
or
[DOWN]
button.
3. Press
[ENTER]
for selecting the desired sub menu.
- DMX address setting, Slave setting
- DMX address setting
With this function, you can adjust the desired DMX-address via the Control Board.
1. Select
“VALU”
by pressing
[UP]
or
[DOWN]
button.
2.
Press
[ENTER]
, adjust the DMX address by pressing
[UP]
or
[DOWN]
button.
3.
Press
[ENTER]
to confirm or pressing
[MODE/ESC]
to return to main menu.
- Slave setting
With this function, you can define the device as slave.
1. Select
“SLAV”
by pressing
[UP]
or
[DOWN]
button.
2. Press
[ENTER]
, the display shows
“ON”
or
“OFF”
.
3. Press
[UP]
to select
“ON”
if you wish to enable this function or press [DOWN] to select
“OFF”
if you
don’t.
4. Press
[ENTER]
to confirm or press
[MODE/ESC]
to return to main menu.
-
DMX address setting via controller
With this function, you can adjust the desired DMX-address via an external controller.
This function can only be activated when the DMX-value of all other channels is set to "0" on the
controller.
Select “EBOC” by pressing [UP] or [DOWN].
Press [ENTER], the display shows “ON” or “OFF”.
Press [UP] to select “ON” if you wish to enable this function or [DOWN] to select “OFF” if you don’t.
Press [MODE/ESC] to confirm.
Press [ENTER] in order to return to the main menu.
On the controller, set the DMX-value of channel 1 to "7".
Set the DMX-value of channel 2 to "7"or "8". When set to "7" you can adjust the starting address between 1
and 255. When set to "8" you can adjust the starting address between 256 and 511.
