Tritex Multigauge 5700 Datalogger Ultrasonic Thickness Gauge www.tritexndt.com
Page 47
To optionally add a reference name for
Record number 1
, check the text
box and type a name up to 30 characters long. Save the settings of
Record number 1
by clicking
‘Save Record 1’
button.
The next steps are dependent on the file structure selected in Step 1:
1.
If Single String or Single Grid was selected:
This completes Step 2.
‘The Done : proceed to Step 3’
button
will become active.
2.
If Multiple String or Multiple Grid was selected:
i.
With all
Strings
or
Grids
the same length, all remaining
records will automatically be preset to the same length as
record number 1
. The up/down value selection boxes will be
greyed-out inactive and the
‘Done : proceed to Step 3’
button will become active. Each remaining record can be
optionally named before proceeding. If they are not named at
this stage then they can be later edited when the template is
opened.
ii.
If the
Strings
or
Grids
have different lengths then the number
of vertical and horizontal measurement points must be set in
at each stage. Also, a name can be optionally added at each
step.
iii.
Use the
and
keys to toggle between the different
records to make any changes.
iv.
When finished, click on
‘Done : proceed to Step 3’
button.
This button only becomes active after the last
‘Save Record’
button has been clicked.
Step 3: Save the New Template
1.
The template can be given a descriptive name for easier
identification. This reference name will appear on the
Datalogging
tab
when the template is opened.
2.
Now click
button. A standard File-Save dialog
will pop up. Navigate to your required sub-directory, and enter a
name for the new file. The file will be saved as <new name>.ttx
Note:
Tritex Communicator templates are saved as text files with .ttx file
extension [*.ttx]. These files should not be edited, except by Tritex
Communicator program, to prevent incompatibility.
>>
>>
Save as Template
