Tritex Multigauge 5700 Datalogger Ultrasonic Thickness Gauge www.tritexndt.com
Page 22
7. Datalogging
7.1.
Using the File Wizard
The File Wizard guides the users through the setting up templates and logfiles
on the gauge. Templates and logfiles can also be setup using Communicator
software, supplied with the gauge, and then downloading these to the gauge.
i
Navigate to ‘File Wizard’ on the ‘Home’ screen using the ‘Arrow’
keys (2,5,7 & 9).
Use the Definition of Menu Items on pg 13 as a
guide.
ii
Press ‘OK’ (4).
iii
Use the ‘Up’ (5) and ‘Down’ (9) buttons to select the required
option for the list below.
iv
Press either Option Key 1’ (1) or ‘Option Key 2’ (6), the gauge will
return to the ‘Home’ screen.
There are three options:
a. Create a new file using a Wizard
b. Create a new file using a Template list
c. Create a new Template
Note:
The procedure for creating a New File or New Template is the same and
will be covered together below. At the end, however, the File is allocated a
number whereas the Template number can be selected:
QUIT
BACK
Create Logfile
New File using Wizard
OK
Create New Template
New File using Template list…
