42
8. LCD Display and Settings
5. Battery Setup
Route: Main Screen
Setting
BATTERY SETUP
BAT RATING VOLT (V):
The default setting is 240.
TYPE (AH):
Sets the battery rating. The default setting is 18.
LOW BATTERY ALARM (220):
The default setting is 220.
SHUTDOWN VOLT (V):
The default setting is 192V.
BATTERY NUMBER:
The default setting is 20.
Install Date (Y-M-D):
Battery’s actual install date.
Replace Date (Y-M-D):
Battery’s replacement date.
Use function keys (
), (
) and (
) to change the BATTERY SETUP setting.
6. Battery Test
Route: Main Screen
Setting
BATTERY TEST
Auto Deep Discharge:
There are four settings: OFF, 30D, 60D and 90D. The default setting is OFF.
Manual Test:
Initiates the start of a battery manual test. The test time is five minutes. If the battery’s voltage is lower than 220V, the
result is fail. If above, the result is pass.
Clear Test Result:
Clears the battery test result.
Use function keys (
), (
) and (
) to change or initiate the BATTERY TEST setting.
