background image

8

5-Year Limited Warranty 

Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for a period of 5 

years from the date of initial purchase. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the 
product, at its sole discretion.
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO 
EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED 
WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; 
AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied 

warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not 

apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from jurisdiction to jurisdiction).
WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use intended. Since individual 
applications are subject to great variation, the manufacturer makes no representation or warranty as to the suitability or fitness of these devices for any specific 

application.

Warranty Registration 

Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product.You’ll be automatically entered into a drawing for a chance to win a 
FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Regulatory Compliance Identification Numbers 

For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series number. The series number 
can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance information for this 
product, always refer to the series number. The series number should not be confused with the marketing name or model number of the product.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.

9. Specifications

10. Storage and Service

11. Warranty and Warranty Registration

Model

SRW15US

Dimensions (H x W x D)

30.3” x 23.63” x 21.6” (770.5 x 600 x 549 mm)

Unit Weight

88.2 lb (40 kg)

Load Capacity*

225 lb (102 kg) Stationary or Rolling

Mounting Depth (Adjustable)

3” to 20.5” (76 to 521 mm)

* Full wall-mount load capacity requires a mounting surface capable of bearing the full load. Rolling applications require optional SRCASTER accessory kit.

Storage 

The enclosure should be stored in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and gasses, 

conductive contaminants, dust and direct sunlight. Store the enclosure in its original shipping container if possible.

Service 

Your Tripp Lite product is covered by the warranty described in this manual. A variety of Extended Warranty and On-Site Service Programs are also 

available from Tripp Lite. For more information on service, visit www.tripplite.com/support. Before returning your product for service, follow these steps:
1. Review the installation and operation procedures in this manual to insure that the service problem does not originate from a misreading of the 

instructions.

2. If the problem continues, do not contact or return the product to the dealer. Instead, visit www.tripplite.com/support.
3. If the problem requires service, visit www.tripplite.com/support and click the Product Returns link. From here you can request a Returned Material 

Authorization (RMA) number, which is required for service. This simple on-line form will ask for your unit’s model and serial numbers, along with 

other general purchaser information. The RMA number, along with shipping instructions will be emailed to you. Any damages (direct, indirect, special 

or consequential) to the product incurred during shipment to Tripp Lite or an authorized Tripp Lite service center is not covered under warranty. 
Products shipped to Tripp Lite or an authorized Tripp Lite service center must have transportation charges prepaid. Mark the RMA number on the 

outside of the package. If the product is within its warranty period, enclose a copy of your sales receipt. Return the product for service using an 

insured carrier to the address given to you when you request the RMA.

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Summary of Contents for SmartRack SRW15US

































Reviews: