background image

24

1111 W. 35th Street, Chicago, IL 60609 USA 

www.tripplite.com/support

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the 
equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio 
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case 
the user will be required to correct the interference at his own expense. The user must use shielded cables and  
connectors with this product. Any changes or modifications to this product not expressly approved by the party  
responsible for compliance could void the user's authority to operate the equipment.

FCC Radio/TV Interference Notice

1-Year Limited Warranty

TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year 
from the date of initial purchase. TRIPP LITE's obligation under this warranty is limited to repairing or replacing (at its 
sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material 
Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center. Products must be 
returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid and must be 
accompanied by a brief description of the problem encountered and proof of date and place of purchase. This warranty 
does not apply to equipment, which has been damaged by accident, negligence or misapplication or has been altered or 
modified in any way. 
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED,  
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some 
states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) 
may not apply to the purchaser. 
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT,  
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, 
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any 
costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of 
substitutes, claims by third parties, or otherwise.

Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You'll be automatically 
entered into a drawing for a chance to win a FREE Tripp Lite product!* 
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union) 

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers 
buy new electrical and electronic equipment from Tripp Lite they are entitled to:
•  Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)
•  Send the new equipment back for recycling when this ultimately becomes waste
Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause 
the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended. Do not 
use this equipment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.
Tripp Lite follows a policy of continuous improvement. Product specifications are subject to change without notice.

Warranty Registration 

201002116 • 932925-EN

201002116  93-2925.indd   24

3/15/2010   11:48:49 AM

Summary of Contents for NetCommander B070-008-19













































































Reviews: