Tripp Lite MODBUSCARDSV, Operation Manual

Page: 12 / 48

12
Code(FF) Name Definition
01 cBusOver BUS Voltage is over 450V
02 cBusUnder BUS Voltage is under 320V, 200 ms
03 cBusUnbalance +BUS, -BUS difference is over 50V, 200 ms
04 cBusShort Hardware Signal Trigged
06 cBusSoftTimeOut BUS soft-start time is over 120 sec
07 cInvSoftTimeOut Inverter soft-start time is over 120 sec
08 cInvVoltHigh Inverter RMS is over 250V, 200 ms
09 cInvVoltLow Inverter RMS is under 150V, 200 ms
10 cRInvVoltShort R-phase voltage is less 70V and current is over 50A
11 cSInvVoltShort S-phase Voltage is less 70V and Current is over 50A
12 cTInvVoltShort T-phase Voltage is less 70V and Current is over 50A
13 cRSInvVoltShort RS-phase Voltage is less 70V and Current is over 50A
14 cSTInvVoltShort ST-phase Voltage is less 70V and Current is over 50A
15 cTRInvVoltShort TR-phase Voltage is less 70V and Current is over 50A
16 cInvRNegPow 800W, 40 ms; 400W, 100 ms
17 cInvSNegPow 800W, 40 ms; 400W, 100 ms
18 cInvTNegPow 800W, 40 ms; 400W, 100 ms
19 cOverLoadFault Overload occured, but bypass is not good
20 cBatteryFault Battery is connected reversely
22 cOverTemperature The max. temperature sensor is over 80°C
25 cCanFault CAN bus is abnormal and droop source needs to be changed
26 cSynSigFault SYNCHRO Signal Fail
27 cTRIG0Fault TRIG0 Signal
28 cRelayFault Inverter Relay Short
29 cLineSCRFail I/P SCR is Open
31 cSPSFault SPS output is abnormal
32 cParaCableLoosenFault Parallel Cable is loose
33 cDSPMCUStopComm DSP and MCU do not communicate
34 cBypassSCRFault STS Bypass SCR fail
35 cBypassTemperatureFault STS is over-temperature
36 cInvVoltOver Inverter Sample voltage is over 380V, 156 us
Appendix 3
19-07-265 93-39CA_RevA
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support