4
Extender Kit Installation
Notes:
1. Test to make sure the entire installation works properly before pulling cables
through ceilings or walls.
2. To achieve maximum distance and performance, use 24 AWG solid-wire Cat5e/6
cable. Using stranded-wire Cat5e/6 cable or cable with a gauge (AWG) size higher
than 24 AWG will result in shorter extension distance. Higher gauge cabling, such
as 26 AWG, has a more limited transmission capability than lower gauge cabling.
All Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid-wire cabling.
3. Press the Audio button on the transmitter to switch between stereo and
7.1-channel surround sound audio. The unit is set to transmit stereo by default.
OPTIONAL
LOCAL MONITOR
LOCAL TRANSMITTER
Up to 125 ft. at 1080p (60Hz)
REMOTE RECEIVER
Blu-ray™ PLAYER
LOCAL
AUDIO
INPUT
OUTPUT
OUTPUT
1.
Make sure the HDMI source is turned OFF.
2.
Connect the HDMI source to the INPUT port on the transmitter.
3.
Optional:
Connect a local monitor to the LOCAL port on the transmitter.
4.
Connect the external power supply to the transmitter, and plug it into a
Tripp Lite surge protector, power distribution unit (PDU) or
uninterruptible power supply (UPS). The green RJ45 LED lights to
indicate the unit is receiving power.
15-12-242-933539-EN.indd 4
1/8/2016 1:51:35 PM
