background image

8

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

15-12-242 • 93-3539_RevA

 Warranty and Product Registration

FCC Notice, Class B

This device complies with part 15 of the FCC Rules. Operation is subject to the following two 
conditions: (1) This device may not cause harmful interference, and (2) this device must accept 
any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. This equipment generates, 
uses and can radiate radio frequency energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the interference by one or more of 
the following measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected.

•  Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications to this equipment not expressly approved by Tripp Lite could void 
the user’s authority to operate this equipment.

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and 
implementing regulations, when customers buy new electrical and electronic equipment 
from Tripp Lite they are entitled to:
•  Send old equipment for recycling on a one-for-one, like-for-like basis (this varies 

depending on the country)

•  Send the new equipment back for recycling when this ultimately becomes waste

Use of this equipment in life support applications where failure of this equipment can reasonably 
be expected to cause the failure of the life support equipment or to significantly affect its safety 
or effectiveness is not recommended. Do not use this equipment in the presence of a flammable 
anesthetic mixture with air, oxygen or nitrous oxide.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without 
notice.

15-12-242-933539-EN.indd   8

1/8/2016   1:51:35 PM

Summary of Contents for B126-1A1-POC









Reviews: