25
1
Make sure the HDMI source is powered OFF.
2
Connect the HDMI source to the INPUT port on the B126-004 using
a Tripp Lite P568-Series HDMI Cable.
3
Connect the LOCAL port on the B126-004 to the INPUT port on a
second B126-004 using the included 1-ft. HDMI daisy-chain cable.
4
Repeat step 3 if you want to connect a third B126-004.
5
Optional:
Connect a local monitor to the LOCAL HDMI port of the
last B126-004 using a Tripp Lite P568-series HDMI cable.
6
Connect the external power supply to the first B126-004 in the
daisy-chain and plug it into a Tripp Lite Surge Suppressor, PDU or
UPS. The green RJ45 LEDs and the red Power LED on the
B126-004 will illuminate to indicate power is being received from
the external power supply.
7
Repeat step 6 for each additional B126-004 in the daisy-chain.
8
Using Cat5e/6 cable, connect one of the RJ45 output ports on the
local unit to the RJ45 input port on the B126-110 remote/repeater
unit.
9
Connect a monitor to the HDMI OUTPUT port on the remote/repeater
unit using a Tripp Lite P568-Series HDMI Cable.
10
Connect the external power supply to the remote/repeater unit and
plug it into a Tripp Lite Surge Suppressor, PDU or UPS. The green
power LED and the green RJ45 LEDs illuminate to indicate the unit
is receiving power.
Up to 4 units can be daisy-chained (3 remote/repeaters and 1 receiver).
To connect additional remote/repeater units, proceed to step 11. To
finish your installation with a B126-1A0 or B126-1A0-WP-1 remote
receiver unit, proceed to step 15.
Extender/Splitter Daisy-Chain with
Remote/Repeater Installation
(B126-004 only)
201109206-93-3023-EN.indd 25
10/24/2011 10:01:26 AM
