22
12
Connect the B126-1P0 HDMI connector to a monitor; or, connect
the B126-1P0-WP-1, B126-1A0 or B126-1A0-WP-1 to a monitor
using a Tripp Lite P568-Series HDMI Cable. Both the green and
orange RJ45 LEDs on the B126-1P0, and the green LED on the
B126-1P0-WP-1, illuminate to indicate the unit is receiving power
from the connected monitor.
13
Repeat step 12 for each additional monitor you are connecting.
14
Turn on the power to the HDMI source. The orange RJ45 LEDs
illuminate on the B126-004 to indicate the unit is receiving a
signal from the source. The screen should now be displayed on the
connected monitors.
15
If necessary, use the Equalization control on the B126-1A0 or
B126-1A0-WP-1 to adjust the video image.
Note:
An improper
Equalization setting can cause the monitor not to display a picture
at all. Try each Equalization setting until an acceptable picture is
displayed.
Extender/Splitter Daisy-Chain Installation
(B126-004 only)
201109206-93-3023-EN.indd 22
10/24/2011 10:01:23 AM
