11
Extender Kit with Remote/Repeater Installation
3
Optional for B126-1A1:
Connect a local monitor to the LOCAL
HDMI port using a Tripp Lite P568-Series HDMI Cable.
4
Connect the external power supply to the local unit and plug it into a
Tripp Lite Surge Suppressor, PDU or UPS. The green LED illuminates
to indicate the unit is receiving power from the external power
supply.
5
Using Cat5e/6 cable, connect the RJ45 port on the local unit to the
RJ45 INPUT port on the B126-110 remote/repeater unit.
6
Connect a monitor to the HDMI OUTPUT port on the remote/repeater
unit using a Tripp Lite P568-Series HDMI Cable.
7
Connect the external power supply to the remote/repeater unit and
plug it into a Tripp Lite Surge Suppressor, PDU or UPS. The green
power LED and the green RJ45 LEDs illuminate to indicate the unit
is receiving power.
Up to 4 units can be daisy-chained (3 remote/repeaters and 1 receiver).
To connect additional remote/repeater units, proceed to step 8. To finish
your installation with the B126-1A1 or B126-1A1-WP remote receiver
unit, proceed to step 12.
8
Using Cat5e/6 cable, connect the RJ45 OUTPUT port on the first
remote/repeater unit to the RJ45 INPUT port on a second remote/
repeater unit.
9
Connect a monitor to the HDMI OUTPUT port on the remote/repeater
unit you just added using a Tripp Lite P568-Series HDMI Cable.
10
Connect the external power supply to the remote/repeater unit and
plug it into a Tripp Lite Surge Suppressor, PDU or UPS. The green
power LED and the green RJ45 LEDs illuminate to indicate the unit
is receiving power.
201109206-93-3023-EN.indd 11
10/24/2011 10:01:21 AM
