
6-7
EMPRESS
6.4 REAR VIEW CAMERA/MONITOR SYSTEM
REAR VIEW CAMERA
An rear view camera/monitor system is available to
mount on the back of the unit to provide a view of
the back of the unit.
1.
Camera:
The camera is mounted to pick-up a view of
the area behind the unit for backing up or a
trailer that is being towed.
2.
Monitor:
Normally the monitor is mounted so it is visible
to the driver to assist in backing up or driving.
3.
Operating Modes:
a.
On/Off:
In this mode, the system operates only
when the system is turned on. It is not
recommended that it be operated on a full
time basis when driving as it can be very
distracting.
b.
Standby:
In this mode, the system automatically
comes on when the transmission is shifted
into reverse to assist in backing up. It
goes off when the transmission is shifted
back into drive.
4. Refer to the camera/monitor system manual
for more detailed operating and system in-
structions.
REAR VIEW MONITOR
Summary of Contents for EMPRESS SERIES
