6-6
EMPRESS
6.3.4 INTRUDER ALARM (Optional)
See the operating instructions in the Owner Infor-
mation Package. The intruder alarm system is con-
nected to the entry doors of your vehicle and two
motion detectors located inside the unit to protect
it from theft or uninvited intrusion.
Arm and disarm it using the remote transmitter
supplied with the vehicle or the controls under the
left side of the dash.
Depress the arm or disarm button on the transmitter
as desired. When arming the system, the horn will
sound 2 short chirps. When disarming the system,
the lights will come on for a few seconds.
When the alarm is set off, the horn will honk and
the lights will fl ash. Stop the alarm by pressing the
disarm button on the remote control or turn the igni-
tion on and depress the valet switch control button
underneath the left side of the dashboard. Refer to
the operator's manual in the information package
for more detailed instructions.
Valet Switch control button
NTRUDER ALARM SYSTEM
Motion Detector - Living Area
Motion Detector - Bedroom
Summary of Contents for EMPRESS SERIES
