www.trioniaq.com
the volume and counter clockwise decreases the
volume. When adjustment has been made, be
sure to retighten the set screw.
System
Detergent Required
ATS-2
.2
ATS-4
.4
ATS-6
.63
ATS-8
.91
ATS-10
1.2
ATS-12
1.4
Programming Time Clock for Automatic Wash
General Information
The panel-mounted digital timer
series included with the ATS
Control can be operated in four
separate power supplies, ranging
from 240 VAC to 12 VDC. Output
format can be produced to be volt-
free or voltiac-output. Batteries of
lithium CR2032 or rechargeable
V80H are optional for retaining the programming during
timer’s disconnected operating power.
The digital timer is accurate to the minute, designed
with either six or eight ON/OFF (events) per day. It
also provides 15 combinations of daily programs
which can lead great convenience to users upon
choosing the required days in a week for operating
the timer.
Programming Functions
• TIMER: Programs review and setting programs
•
MANUAL: To select “ON, AUTO, or OFF”
• CLOCK: To adjust current DAY and TIME
• DAY: To adjust day of week
• HOUR: To adjust hour
• MIN: To adjust minute
• P : Reset timer’s setting
• LED: To indicate ON/OFF status
Press P button to reset timer before programming.
Adjusting Clock
Press and hold CLOCK and then press DAY key, HOUR
key, MIN key respectively to adjust clock of timer to
ATS Series
9
I n s t a l l a t i o n , O p e r a t i o n , & S e r v i c e M a n u a l
accurate DATE, HOUR, MINUTE. In 12-hour format,
PM and AM shall appear on LCD screen. In 24-hour
format, LCD screen shall indicate 0:00 - 23:59.
Programming the Timer
1. Press TIMER key. LCD screen shall show 1
ON
.
2. Press DAY key to select any of the 15 combinations
of daily programs to your application demand.
Continuing to press DAY key will cause the LCD
screen to alternate among 15 combinations.
3. Press HOUR and MIN respectively to set desired
hour and minute for 1
ON
.
4.
After finished setting 1
ON
, press TIMER key again.
1
OFF
should appear on the LCD screen.
5. Press DAY key to select any of the 15 combinations
of daily programs to your application demand.
Continuing to press DAY key will cause the LCD
screen to alternate among 15 combinations.
NOTE: Day combinations chosen in each of the ON/
OFF program periods must be consistent. The OFF
time will need to be one minute after the programmed
ON time.
6. Repeat programming procedure 3 to set desired
hour and minute for 1
OFF
.
7.
When finished setting 1
ON
and 1
OFF
, press TIMER.
2
ON
shall appear on LCD screen.
8. Repeat programming procedure above to complete
the rest of ON/OFF program period event or just to
the desired number of ON/OFF (event) setting for
demand of practicable application.
9. When finished program setting (event), press
CLOCK. Timer shall start to execute programs.
Reviewing Programs
Keep pressing TIMER, and the display on the LCD
screen shall alternate display among each of 6 or 8
ON/OFF events.
Using Override Functions
Timer is designed with two override functions to widen
its usage among practicable applications. Override
function is only effective when timer is running in
AUTO mode.
Temporary Override
Condition 1: When timer’s output status is ON, press
MANUAL key to move indicator from AUTO to OFF. Timer
X
X
