Trinamic TMCM-1160 Manual Download Page 93

Page: 93 / 110

TMCM-1160 CANopen® Firmware Manual • Firmware Version V3.20 | Document Revision V2.10 • 2019-JAN-04

93 / 110

Index pulse

Home switch

Figure 13: Homing Method 5

9.1.5

Homing Method 17: Homing on negative Limit Switch

Using this method, the initial direction of movement shall be leftward if the negative limit switch is inactive

(here: low). The home position shall at the point where the negative limit switch becomes inactive.

Negative limit switch

Figure 14: Homing Method 17

9.1.6

Homing Method 18: Homing on positive Limit Switch

Using this method, the initial direction of movement shall be rightward if the positive limit switch is inactive

(here: low). The home position shall be at point the where the positive limit switch becomes inactive.

Positive limit switch

Figure 15: Homing Method 18

Terms of delivery and rights to technical change reserved.
Download newest version at

www.trinamic.com

Summary of Contents for TMCM-1160















































































































Search results

Summary of Contents for TMCM-1160

Reviews:

Trinamic TMCM-1160, Manual, Page: 93 / 110

Search results

Summary of Contents for TMCM-1160

Reviews: