Trinamic TMCM-1160 Manual Download Page 82

Page: 82 / 110

TMCM-1160 CANopen® Firmware Manual • Firmware Version V3.20 | Document Revision V2.10 • 2019-JAN-04

82 / 110

Proﬁle Velocity Mode

The proﬁle velocity mode is used to control the velocity of the drive without a special regard of the position.

It contains limit functions and trajectory generation.

The proﬁle velocity mode covers the following sub-functions:

• Demand value input via trajectory generator.

• Monitoring of the proﬁle velocity using a window-function.

• Monitoring of velocity actual value using a threshold.

The operation of the reference value generator and its input parameters include:

• Proﬁle velocity

• Proﬁle acceleration

• Proﬁle deceleration

• Emergency stop

• Motion proﬁle type

8.1

Detailed Object Speciﬁcations

8.1.1

Object 6040

: Control Word

This object indicates the received command controlling the power drive system ﬁnite state automaton

(PDS FSA). The CiA-402 state machine can be controlled using this object. Please refer to ﬁgure

for

detailed information.

In pv mode the control word does not contain any operation mode speciﬁc bits.

Structure of the Control Word

MSB

LSB

Legend: nu=not used; r=reserved; h=halt; fr=fault reset; eo=enable operation; qs=quick stop; ev=enable

voltage; so=switch on.

Table 244: Structure of the Control Word in pv Mode

Terms of delivery and rights to technical change reserved.
Download newest version at

www.trinamic.com

Summary of Contents for TMCM-1160















































































































Search results

Summary of Contents for TMCM-1160

Reviews:

Trinamic TMCM-1160, Manual, Page: 82 / 110

Search results

Summary of Contents for TMCM-1160

Reviews: