TMCM-1021 TMCL
™
Firmware Manual • Firmware Version V1.42 | Document Revision V1.10 • 2018-JAN-09
40 / 109
Digital Outputs in Bank 2
Port
Command
Range
OUT0
SIO 0, 2, <value>
0/1
OUT1
SIO 1, 2, <value>
0/1
Special case
: SIO 255, 2, <x> can be used to change all general purpose digital output lines simulaneously.
The value <x> will then be interpreted as a bit vector where each of the lower eight bits represents one of
the digital outputs. So the range for <x> is 0. . . 255. The value <x> can also be -1. In this case, the value will
be taken from the accumulator register. The following program can be used to copy the states of the input
lines to the output lines:
1
Loop :
GIO 255 , 0
3
SIO 255 , 2, -1
JA Loop
©2018 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at
