Visionary - Hardware Installation and Configuration Manual
40
Upgrading the Firmware
Occasionally, Trilithic may release updates for the
Visionary’s firmware. Firmware updates are
included in new configuration utility releases. To
update the Firmware on a Visionary, perform the
following procedure:
1. Install the latest configuration utility on a PC.
2. Open the Visionary configuration software.
3. Establish an Ethernet connection between
the host computer on which the Visionary
configuration software is installed, and the
Visionary (refer to
Chapter 4: Configuring
the Visionary, Configuration Procedure,
General Communication Configuration,
and
Visionary Configuration
sections).
2. On the
Main
tab, click the
Upgrade Firmware
button.
3. Click the
Continue
button to
begin the firmware upgrade
procedure. To abort the upgrade
procedure, click the
Cancel
button.
Do not power-off the Visionary or the host computer, or
interfere with Ethernet communications between the Visionary
and the computer during the upgrade procedure. Doing so may
cause damage to the Visionary that requires factory repair.
