www.trikdis.com
20
May, 2019
RF transmitter T16
Settings group “Allow Installer to change”
There are two access levels for configuring the radio transmitter
T16
(administrator and installer). The
administrator has access to all configuration functions. Installer access allows to make limited changes to
the transmitter’s configuration. The administrator can specify which parameters the installer (user) can
change.
Settings group “Available radio frequencies”
You can add/delete radio frequencies that the
T16
transmitter can use to/from the list. Radio frequencies
are given “names”.
3.6
“CID to UNI table” window
Contact ID codes received from the security system’s control panel are converted to the radio system’s
(RAS2M, LARS) codes. Only
Contact ID messages described in the table (CID column) are converted to the
radio system’s codes and sent to the ARC. The "?" symbol indicates any number in this position. The "z"
symbol means that the number in the position is added to the main radio system code. The table is editable,
but please change it responsibly and only if it is mandatory to do so, because if there are errors in the table,
the system might not work properly.
3.7
Restoring default settings
To restore the
transmitter’s
factory settings, click the button
Restore
in the
TrikdisConfig
program
.
4.
Testing of the T16 RF transmitter
When configuration and installation are finished, perform a system check:
Note:
After finishing configuration, click
Write [F5]
, wait for the data to be saved and disconnect
the USB cable.
