Trikdis GV15, User Manual

Page: 20 / 23

©1997-2015 TRIKDIS 20 www.trikdis.com
Controller GV15
Configuration and control by SMS messages
17 SETP
+370xxxxxx,<Name> Entering user name and phone number:
User phone number (up to 16 digits) and name (1-13 symbols).
E. g.: 123456 SETP +370654321,Name
18 DELP
+370xxxxxx
<Name> Deleting user phone number:
User phone number;
User name.
E. g.: 123456 DELP +370654321
E. g.: 123456 DELP Name
19 OUT1
ON
OFF Changing 1st relay status:
1st relay status changing into "On"
1st relay status changing into "Off"
E. g.: 123456 OUT1 OFF
20 OUT2
ON
OFF Changing 2nd relay status:
2nd relay status changing into "On"
2nd relay status changing into "Off"
E. g.: 123456 OUT2 ON
21 LISTA Administrator list request.
SMS messages with phone numbers and administrator names enlisted
will be generated and sent.
E. g.: 123456 LISTA
22 LISTU User list request.
SMS messages with phone numbers and user names enlisted will be
generated and sent.
E. g.: 123456 LISTU
Access and SMS password recovery
The forgotten Access/SMS password can be reset by SMS messages receiving a temporary password and using the
temporary password to create a new one. Perform two SMS commands:
1. Temporary password request
– "
000000 Recovery Password
"
. The controller will send a reply with temporary
password "Temporary Password: XXXXXX “.
2. Password changing command
– "
XXXXXX PSW YYYYYY
"
(XXXXXX
–
temporary password, YYYYYY
–
new
password).
Notes
Messages must be sent from the 1st administrator phone only.
Temporary password is valid only for one time. Having send a false password changing message (or other
command) it is necessary to repeat the recovery operation.