www.trikdis.com
20
March, 2019
Cellular security control panel CG17
Settings group “iButtons”
Note:
More than one key can be assigned to a user! All newly registered keys will be assigned to the
User ID9
(No
name). Names can be assigned only to eight users. Permissions for
User ID 9
can be set using the settings group
User ID9 permissions
.
ID
– key’s number on the list.
User
– the user the key is assigned to. To assign a key to a user, change
ID9
to any other user’s
ID
from the table
“Users
& Reporting to User”
. (e.g. to assign a key to user No. 3, change ID9 to ID3)
iButton code
–
iButton
key identification number.
Control
– choose what action the system must take after reading the key (e.g.,
TM17
): None / Arm / Disarm / Arm &
Disarm.
3.4.1
Registration of contact (iButton) keys
1.
If the “
iButtons
” list is empty, the first registered key is saved to the first line of the list and becomes the
Master key
.
2.
To turn on contact key registration mode, hold the
Master key
against the key reader for at least 10 seconds. When
registration mode is on, the
TM17
key reader’s LED indicator “
State
”
will start to blink in green.
3.
To register user keys, hold them against the key reader one by one. 3 sound signals from the reader will indicate that the
key has been registered.
4.
When you finish registering the user contact (
iButton
) keys, hold the
Master key
against the key reader again to turn off
registration mode. When the registration mode is turned off, the “
State
”
LED indicator of the
TM17
key reader will stop
blinking
.
5.
To delete all keys (including the master key), hold the
Master key
against the reader for at least 20 seconds.
Important:
The
Master key
should only be used to register other contact keys!
“SMS answer texts” tab
Settings group “SMS answer texts”
Texts of answers to control commands sent using SMS messages can be edited in the field
SMS text
.