7
3 - INPUT
:
If you strike this key with the SELECTOR-knob you will be able to choose the input
which shall reproduce. The signal
9
shows the chosen channel.
4 - RECORD
:
If you strike this key, with the SELECTOR-knob you will be able to choose the input
which shall be copied by a recorder (f.e. cassette-player, tape-recorder etc.) The
signal
10
shows the chosen channel.
5 - SPLIT
:
If you strike this key, the additonal equipment connected to the SPLIT-sockets (f.e.
equalizer, surround decoder) will be smoothed into the Signal way
( Please pay
attention to top
5.3
as well.)
6 - OUT1
:
If you strike this key the ouput 1 can be switched on- or off.
7 - OUT2
:
If you strike this key the output 2 can be switched on- or off.
8 - Mode
:
If you strike this key, the
MODE-Menue
is switched on. The
MODE-Signal
is
gleaming, as long as the
MODE-
Menue is active. With short strikes you will get to
each top of the menue. A longer strike will store the chosen positions. The
MODE
-
Signal
isn't gleaming while storing..As soon as the storing is finished, the
MODE-
Signal starts gleaming again and you can do furhter operations.
Please pay attention to the exact description of the MODE-function under top
5
.
9 - INPUT Display
:
This display shows the just chosen input which is reproduced at the moment.
10 - RECORD Display
:
This display shows the just chosen input, which has just been connected to the
TAPE-OUTPUT.
11 - VOLUME Display
:
This display shows the volume adusted at the moment. Within the
MODE- Menue
it
shows other level
as well. Please pay attention to top
5
too.
12 - LED Multifunction-display
This 6 LEDs give additional information within the MODE-Menue, described more
exactly under top
5.
The upper LED in the middle will gleam if the pre-amplifier is adjusted onto MONO
together with the remote-control-unit
