16
INPUT
RECORD
SPLIT
OUT 1
OUT 2
MODE
Input level adjustment: INPUT 3 is selected and lifted by „4“ (2dB)
Having adjusted the level the
MODE
-
button
has to be pressed for some seconds
(until the
MODE
-
signal
is twinkling again) .. That way the level
-
adjustment for the
selected input is stored.
If you want to work with further input-level please select the the next entrance with
the
INPUT-knob
and operate as described above.
The adjustment-possibility ove- 6dB in steps of 0,5dB, that means 12 digits
up and 12 digits down.
If you want to finish the adjustments, the amplifier will leave the menue automatically
after 10 seconds.
5.4
Adjustment of the basic-volume
The
TRV 100
has got an elctronial volume-adjustment. This operation offers a better
reproduce-quality (in comparison to a convenient (Potentiometers) and advantageous
extra-functions. One of them is the adjustment-possibility of the basic-volume. That is
the
volume-level, which adjusts itself automatically after switching on the pre-
amplifier. Even when you have switched-off the
OUTPUTS
for instance in order only
to listen with head-phones, the basic-volume will be adjusted automatically after
switching-on again. That way it is assured that a high positioned volume-level
adjusted like that before the last switching-off, will sound immediately at the output at
the speaker.
But the basic-volume can be pre-adjusted in the
MODE-menue
by yourself.
Therefore you switch the
MODE-button
and you get at the fourth position to the
adjustment-modus of the basic-volume.
