www.tridonic.com
8
Subject to change without notice. Information provided without guarantee.
Data sheet 11/21-LC888-6
LED Driver
Linear fixed output
3.2 Ceiling installation
3.3 Embedded installation
1 2 3 4 5 6
ON
DIP
M3
M3
Tolerance: ± 0.2 mm
5.3
1.9
6
3
1 2 3 4 5 6
ON
DIP
M2
M2
Tolerance: ± 0.2 mm
3.7
1.21
8
2
90°
M2
>13
84
M2
1
D < 1 mm
M2
>15
84
M2
1
1 mm < D < 2 mm
M2
>18
84
M2
1
D > 2 mm
When the radar module is embedded in the lamp board or aluminum sub-
strate, the metal is close to the RF hollow width of the lamp board or alu-
minum substrate is required as follows:
1. When the thickness of the baffle plate and the aluminum
substrate (all the metal part) is D < 1 mm, the suggested hollow length is
80 mm, width > 13 mm.
2. When the thickness of the baffle plate and the aluminum substrate
(all the metal part) is 1 mm < D < 2 mm, the suggested hollow length is
80 mm, width > 15 mm.
3. When the thickness of the lamp block plate and the aluminum substrate
(all the metal part )is D > 2 mm, the suggested hollow length is 80 mm,
width > 18 mm.
lamp board:
aluminum substrate:
lamp board:
aluminum substrate:
lamp board:
aluminum substrate:
